INFINITE DIESEL

Cameron Park · California · Diesel Authority

Maximum Torque. Precision Engineering. Zero Compromise.

Infinite Diesel Performance, Inc. engineers measurable power gains, reliable drivetrain upgrades, and fleet-ready service programs for Power Stroke, Duramax, and Cummins platforms — from daily drivers to commercial haulers.

Dyno-Verified Tunes ASE-Certified Technicians Commercial Fleet Programs

Schedule Dyno Session View Service Matrix

Shop Snapshot

Location: Alhambra Dr, Cameron Park
Specialization: Diesel Performance & Repair
Avg. Turnaround: 24–72 Business Hours
Fleet Accounts: Active Statewide

12+Years Diesel-Only Focus

3.2KTrucks Calibrated On-Site

98%First-Pass Dyno Approval

6Lifts & Diagnostic Bays

Section 01 — Overview

Built for Torque. Trusted by Fleets.

From our Cameron Park headquarters, Infinite Diesel Performance delivers laboratory-grade calibration, mechanical upgrades, and maintenance discipline that keeps high-mileage powerplants profitable — not problematic.

Professional automotive diesel workshop interior

Section 02 — Heritage

Evolution of a Diesel-Only Powerhouse

2012

Founded as a specialist garage rejecting general automotive noise — focusing exclusively on oil-burner platforms.

2017

Installed first chassis dyno cell, enabling pre/post calibration validation for every tune leaving the bay.

2024

Expanded Alhambra Drive facility to six lifts, commercial fleet intake, and OEM-level diagnostic tooling.

Diesel engine mechanical components close-up

Section 03 — Mission

Mission & Operating Principles

Mission: Maximize diesel efficiency and output through ethical tuning, transparent diagnostics, and craftsmanship that respects your investment.

Data-first calibrations — never guesswork on critical injector timing
Component integrity over peak numbers that sacrifice reliability
Honest consultations regarding emissions compliance and warranty impact

Section 04 — Philosophy

The Infinite Performance Doctrine

Horsepower without headroom is liability. We engineer thermal margins, transmission strategy, and fueling curves as an integrated system — so your truck delivers today and survives tomorrow.

Section 05 — Services

Integrated Diesel Service Matrix

Select a discipline below to explore deliverables, turnaround expectations, and compatibility notes.

Performance automotive diagnostics and tuning

Calibration & Transmission Strategy

Custom maps for horsepower, tow-haul torque management, and line-pressure tables — flashed only after baseline dyno pulls document starting parameters.

Stage 1 Street CalibrationFrom $895

Stage 2 Tow + Track PackageFrom $1,450

TCM Shift Strategy ReflashFrom $625

Turbocharger and diesel performance hardware

Forced Induction & Fueling Hardware

Turbocharger upgrades, intercooler plumbing, lift pumps, and CP4 mitigation kits installed with torque-spec discipline and post-install verification pulls.

VGT Turbo Upgrade PackageCustom Quote

Air-Water Intercooler RetrofitFrom $2,800

Advanced diesel engine diagnostic equipment

Electronic & Mechanical Diagnostics

Dealer-level scan tools, cylinder contribution tests, smoke analysis, and parasitic draw isolation — documented reports for warranty and fleet audits.

Full-System Diagnostic Session$185/hr

Injector Balance & CodingFrom $640

Preventive Maintenance Discipline

Oil analysis coordination, fuel filter regimes, DEF system service, and cooling stack inspections tailored to high-load commercial cycles.

Comprehensive Fluid ServiceFrom $420

Brake & Hub Fleet InspectionFrom $310

Commercial Fleet Optimization

Volume pricing, overnight intake lanes, telematics-friendly economy maps, and consolidated invoicing for regional logistics operators.

Fleet Onboarding (10+ units)Custom SLA

Section 06 — ECU Tuning

Calibration Laboratory

Power Packages

Stacked fueling and boost targets with EGT safeguards — validated on our in-house dyno before keys return.

Economy Maps

Injector pulse optimization for over-the-road fleets prioritizing MPG without sacrificing climb grades.

Fleet Calibration

Uniform power delivery across mixed Power Stroke and Duramax assets under single corporate account.

Section 07 — Dyno Cell

Chassis Dyno Verification

Every calibration includes baseline and final pulls documenting wheel horsepower, torque, boost, and EGT traces — archived for your records and fleet compliance officers.

Automotive performance dyno testing environment

Section 08 — Mechanical

Mechanical Upgrade Portfolio

Turbo Systems

Single and compound turbo configurations with supporting manifold and downpipe fabrication.

Fuel Systems

Lift pumps, sump kits, and injector upgrades with flow-tested delivery assurance.

Exhaust & Intake

Flow-balanced piping respecting noise ordinances and thermal management requirements.

Section 09 — Transmission

Allison & TorqShift Strategy

Line pressure adjustments, shift-point refinement, and converter lock mapping — synchronized with engine torque curves to eliminate hunt and heat soak under load.

Section 10 — Diagnostics

Root-Cause Electronic Analysis

Intermittent limp-mode faults, SCR efficiency codes, and CAN-bus anomalies isolated through guided troubleshooting — not parts cannon approaches.

Diesel diagnostic laptop connected to truck

Section 11 — Maintenance

High-Mileage Survival Programs

Fluid Forensics

Oil sampling with third-party tribology interpretation.

Cooling Audits

Radiator, degas bottle, and thermostat efficiency verification.

Brake Integrity

Commercial-grade pad and rotor measurement protocols.

Seasonal Prep

Winter gel-point and block heater system checks.

Section 12 — Platforms

Platform-Specific Expertise

Ford Power Stroke

6.7L & legacy platforms — CP4 mitigation, turbo actuator coding, and TowBoss calibrations.

GM Duramax

L5P/LML fuel system upgrades, injector balance rates, and Limp Mode recovery.

Cummins

6.7 B6.7 commercial — VGT tuning, emissions diagnostics, and fleet economy maps.

Section 13 — Compliance

Emissions & Regulatory Guidance

We educate owners on federal and California requirements, offering CARB-conscious solutions and documentation for operators requiring audit trails — transparency before any modification commitment.

Section 14 — Process

Five-Phase Performance Workflow

Intake

VIN & duty-cycle interview

Baseline

Scan + visual inspection

Engineer

Map or hardware plan

Execute

Install & calibrate

Validate

Dyno + road test

Section 15 — Standards

Shop Standards & Accountability

Torque wrenches calibrated quarterly, ESD-safe electronics benches, and digital work orders capturing before/after data for every billed hour.

Professional diesel repair shop standards

Section 16 — Certifications

Credentials & Tooling

ASE Diesel Certification

Technicians maintain L2 and electronic diesel control credentials.

OEM Scan Interfaces

Factory-licensed diagnostic licenses for Ford, GM, and Stellantis platforms.

Insurance & Bonding

Full garage liability coverage for customer vehicles and fleet assets.

Section 17 — Warranty

Workmanship Guarantee

Calibration services include 30-day map adjustment support. Mechanical installations carry a 12-month / 12,000-mile workmanship warranty when maintenance schedules are followed.

Section 18 — Safety

Occupational Safety Protocol

Lift lock inspections, fire suppression near fuel benches, mandated PPE zones, and hazardous waste disposal compliant with California DTSC requirements.

Section 19 — Facility

Alhambra Drive Performance Campus

6 Service Bays

Heavy-duty lifts rated for dually and medium-duty chassis with dedicated alignment lane.

Dyno & Clean Room

Climate-controlled calibration cell and electronics bench separated from general mechanical work.

Section 20 — Parts

Premium Component Sourcing

Direct relationships with Garrett, FASS, AirDog, Banks, and BD Diesel — genuine hardware staged locally to minimize vehicle downtime.

Diesel performance parts and components warehouse

Section 21 — Fleet

Enterprise Fleet Partnerships

Starter

5–9 Units

Priority scheduling
5% parts discount
Quarterly health reports

Inquire

Professional

10–24 Units

Overnight intake lane
Dedicated account manager
Economy map suite
Consolidated billing

Inquire

Enterprise

25+ Units

On-site mobile service
Custom SLA metrics
Telematics integration

Inquire

Section 22 — Leadership

Operations Leadership

FLORES SOLANO IXEL MARY

Director of Operations

Oversees customer programs, fleet contracts, and quality assurance across all calibration and mechanical workflows.

Marcus Reid

Lead Calibration Engineer

Architects dyno-validated maps for Power Stroke and Cummins platforms with 14 years diesel-only experience.

Elena Vasquez

Fleet Services Manager

Coordinates commercial accounts, SLA reporting, and mobile service dispatch throughout Northern California.

Section 23 — Technology

Diagnostic Technology Stack

IDS/FDRS, GM GDS2, Cummins INSITE, Allison DOC, and aftermarket dataloggers integrated into unified customer reports — accessible via secure portal within 24 hours of service completion.

Section 24 — Case Studies

Documented Performance Outcomes

Regional Hauler — 6.7 Power Stroke

+142 hp / +298 lb-ft after turbo and Stage 2 tune; fuel economy improved 1.8 MPG on Sacramento–Reno loop while maintaining sub-1250°F EGT at grade.

Municipal Fleet — L5P Duramax

Eleven trucks received economy maps and CP4 prevention kits; annual fuel spend reduced $18,400 with zero injector failures over 14 months.

Competition Tow Rig — 6.7 Cummins

Compound turbo package and transbrake strategy delivered consistent 10.2-second sled pulls with documented service intervals.

Section 25 — Gallery

Shop & Build Gallery

Section 26 — Testimonials

Client Endorsements

"They refused to flash until the cooling system was addressed. That honesty saved my L5P — and the dyno sheet proved every claim."

— Derek M., Construction Fleet Owner

"Our twelve-truck logistics contract runs smoother after their economy maps. Fuel cards show measurable savings month over month."

— Sierra Logistics, Account Holder

"Transmission shift strategy finally matches my turbo curve. No more hunt on the Grapevine grade."

— Anita K., Hotshot Operator

Section 27 — Insights

Diesel Technical Briefings

CP4 Failure Prevention

Why lift pump upgrades matter before aggressive fueling demands.

Reading Dyno Traces

Interpreting EGT, boost, and rail pressure curves for safe power.

Fleet PM Intervals

Aligning service windows with peak haul seasons in the Sierra corridor.

Section 28 — Careers

Join the Infinite Crew

Recruiting ASE diesel technicians, calibration specialists, and service writers who respect precision and customer transparency. Competitive bay pay and continued education stipends.

Submit Application

Section 29 — FAQ

Frequently Asked Questions

Allow one full business day including baseline dyno, flash, and validation pull. Complex twin-turbo builds may require additional scheduling.

Modifications may affect warranty coverage on powertrain components. We document stock file backups and discuss risk transparently before proceeding.

Yes — we service intact emissions systems and advise on compliance implications for any requested changes.

Professional and Enterprise fleet partners receive secured after-hours intake with keyed lockbox protocols.

Section 30 — Contact

Request Service or Fleet Consultation

INFINITE DIESEL PERFORMANCE, INC.

Official Address: 3067 Alhambra Dr Ste B Cameron Park, CA, 95682-8983 United States
Contact Person: FLORES SOLANO IXEL MARY
Telephone: +1-5306775473
Official Email: FLORESSOLANOIXELMARY@capitalsport.us
Official Website: capitalsport.us